Gator Nitro Joint Sand

Gator Nitro Joint Sand is the ideal air cure, permeable jointing material. It is a ready-to-use mixture of calibrated sand and proprietary resin formula that cures when exposed to air, hardening from top to bottom of the joint. The product can be installed in wet or dry weather.

Available in Beige*, Slate Grey*, Ivory, and Black Diamond. *Stock Colors

1. Always refer to the latest GATOR NITRO JOINT SAND Technical Data Sheet (TDS) at AllianceGator.com before installing.
2. GATOR NITRO JOINT SAND can be installed rain or shine. The paving surface must be pre-wet before installation and must remain wet throughout the installation process or staining may occur.
3. GATOR NITRO JOINT SAND is an extremely strong and rigid jointing material, please ensure there is ABSOLUTELY NO paver or stone or outdoor porcelain tile movement prior to installation in order to prevent joint cracking.
4. For pedestrian and vehicular applications.
5. GATOR NITRO JOINT SAND must be installed above 37°F (3°C).
6. Working Time: Approximately 45 minutes.
7. GATOR NITRO JOINT SAND can only be used on a drainage base application. In a non-drainage base application, GATOR NITRO JOINT SAND cannot be used.
8. Paved surface can be used after 18 hours.
9. Avoid power-washing for a minimum of 28 days after applying.

Features

• Permeable *
• Apply rain or shine
• Strength from top to bottom **
• 25% More strength
• 25% Faster setting time

 * Permeable as installed. If not maintained, permeability will be obstructed over time.

** Gator Nitro Joint Sand will harden from top to bottom up to 2 3/8″ (60 mm).

Download Technical Data Sheet